BQRMC - METEX ACID SALT 3005, 13005

  • MSDS: BQRMC
  • Manufacturer: MACDERMID INC
  • Product Name: METEX ACID SALT 3005, 13005
  • National Stock Number: 6850-00N036998
Product Identification

Product ID:METEX ACID SALT 3005, 13005
MSDS Date:08/19/1985
FSC:6850
NIIN:00N036998
MSDS Number: BQRMC

Responsible Party
MACDERMID INC
526 HUNTINGDON AVE
WATERBURY, CT 06708
US

Emergency Phone: 203-575-5700;313-644-5626

Info Phone: 203-575-5700

Preparer: CHERRIE GILLIS

Cage: 1FK56

Contractor
MACDERMID INC
WATERBURY, CT 06702 US

Telephone: 203-575-5700

Cage: 1FK56

Ingredients

SODIUM BISULFATE

CAS: 7681-38-1

RTECS: VZ1860000

Fraction By Weight: <70%

ACGIH TLV: 11 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION OF EYES, SKIN AND
MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:WASH THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES.
INGEST:GIVE LARGE AMOUNTS OF WATER, MILK OF MAGNESIA OR EGG WHITES.
CALL MD. SKIN:WASH WITH WATER. INHAL:MOVE TO FRESH AIR.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE CLOTHING. NEVER DISCHARGE
DIRECTLY INTO SEWERS OR WATERWAYS. IF LIQUID, WASH TO CHEMICAL
DRAIN WITH COLD WATER. IF DRY, SWEEP UP AND RETAIN TO MOISTURE
PROOF CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP IN CLOSED CONTAINERS IN COOL, DRY
AREA.
Other Precautions:AVOID EYE AND SKIN CONTACT. ALWAYS WASH CLOTHING
BEFORE REUSE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST TYPE MASK.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:RUBBER APRON/BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C1
Evaporation Rate & Reference:0
Solubility in Water:APPRECIABLE
Appearance and Odor:OFF-WHITE, FINELY BEADED SOLID
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG BASES.
Stability Condition to Avoid:KEEP AWAY FROM MOISTURE.
Hazardous Decomposition Products:OXIDES OF SULFUR.

Disposal

Waste Disposal Methods:NEUTRALIZE CAREFULLY WITH DILUTE BASE TO PH 6 TO
8 WITH DILUTE ALKALI. DECANT TO SEWER. DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.